XHV-07B Double Wing Drop Impact Tester

Product Description of XHV-07B Double Wing Drop Impact Tester

XHV-07B drop tester is mainly used for assessment package in the actual transportation, loading and unloading process by dropping impact in the influence degree, evaluate packing in handling impact resistance strength and the rationality of the design of packaging.

Test Standards of XHV-07B Double Wing Drop Impact Tester

ISO 2248, JIS Z0202-87, ASTM D5276, ISTA

Product Features of XHV-07B Double Wing Drop Impact Tester

Drop tester is mainly used for performing drop test for big carton, it can do various test according to the test subjects requirements (surface, edges, Angle test) after place specimen in balance status. During the test, the rack move down in high speed and leave from specimen, because of high speed shock absorber, the rack is embedded in the base plate.

Technical Parameter of XHV-07B Double Wing Drop Impact Tester

Mass of Specimen	0-80Kgs
Max Dimension of Specimen	1000 x 1000 x 1500mm
Testing Height	350-1500mm (adjustable)
Dimension of Each Wing	700mmx280mm
Dimension of Impact Panel	1600 x 1800mm
Parallel error of impact panel	<1°
Accuracy of Test Height	±10mm
Test method	Surface test, Edge test, Angle test
Drop	Electric
Lifting	Electric
Error in the angle between the falling surface of the specimen and the horizontal during the falling process	<1°
Protection	Motor fault protection, High and low limit protection, Emergency stop
Dimension	1600 x 1800 x 2200 mm
Power Supply	220V, 50Hz, 2000W
Weight	About 300Kgs

Relative Products of XHV-07B Double Wing Drop Impact Tester

XHV-10 Package Shaker

XHV-07C Zero Drop Impact Tester

XHV-07A Single Wing Package Drop Impact Tester

XHV-08 Box Compression Tester