XHF-106 Impact Protection Tester

Product Description of XHF-106 Impact Protection Tester

Impact Protection Gloves :For gloves that are designed, constructed and claimed to provide specific impact attenuation, the materials shall not crack when a 2.5kg load with an impact energy of 5J drops on the tested material- peak transmitted shall also be <7 KN.

It is used for protective clothing impact test.

Adopt high precision piezoelectric ceramic force sensor, high resolution, fast reaction, good repeability, the machine controlled by computer, all test process is through computer controlled, automatic record impact force, automatic calculate average impact force, testing report also be available.

Test Standards of XHF-106 Impact Protection Tester

Standard: For Protective Clothing: EN 1621-1, EN 1621-2 For Protective Gloves: EN 13594, EN 388

Product Features of XHF-106 Impact Protection Tester

Technical Parameter of XHF-106 Impact Protection Tester

For Protective Clothing
Force measurement	0-60000N
Frequency response range	5-1000Hz
Lift device	Motorized system, have upper and lower limit
Dimension	650mm×770mm×2200mm
Power Supply	AC 220V+/-10%, 50Hz
EN 1621-1
Mass of striker	5000+/-10g
Flat Striking Surface	40mmx80mm
Round Edges of Striker	5+/-0.5mm Radius
Impact energy	50J+/-2J
Anvil Radius	50mm
Total Height of Anvil	180+/-20mm
EN 1621-2
Bar Impactor Length	160+/-2mm
Bar Impactor Width	50+/-1mm
Bar Impactor Cylindrical Face Radius	12.5+/-0.1mm
Mass of impactor and guided mass	5000g+/-50g
Impact Energy	50+/-1.5J
Anvil Height	190+/-20mm
For Protective Gloves
Mass of striker	2.5kg
Impact energy	5J
Flat face of striker	80mm
Force measurement	Force measurement
Lift device	Motorized system, have upper and lower limit
Dimension	650mm×770mm×2200mm
Power Supply	AC 220V+/-10%, 50Hz

Relative Products of XHF-106 Impact Protection Tester

XHF-93B Cut Resistance Tester

XHF-93A Blade Cut Resistance Tester