XHF-152A Slip Resistance Tester

Product Description of XHF-152A Slip Resistance Tester

Apply a predetermined load by different mediums like wood, PVC, ceramic tile or specified and set specified friction times and speed, which is to measure the sole friction coefficient, and then judge the slip resistance of shoes.

Principle

Place specimen on test stand, and glycerin as a lubricant, exert a certain load, and move test bench in horizontal direction compared with sample by lateral traction forces, to measure dynamic friction and calculate kinetic coefficient of friction.

Test Standards of XHF-152A Slip Resistance Tester

GB 21148-2020 ISO 20345-2011 GB/T28287,EN ISO13287,SATRA TM144, ASTM F2913,GB/T3903.6-2017, EN 13634

Product Features of XHF-152A Slip Resistance Tester

Test Items:

Forward heel slip

Backward forepart slip

Forward flat slip

Technical Parameter of XHF-152A Slip Resistance Tester

Vertical Load Range	0-1000N
Horizontal Load Range	0-1000N
Testing Speed	(0-1.5±10%）m/s adjustable
Stroke of Movement Plate	0-200mm
Testing Speed Accuracy	±1%
Static Contact Time	0-5S adjustable
Shoe Last Fixing Fixture	0-30°
Load Cell	Vertical 1KN (USA Transcell Brand)
	Horizontal 2KN (USA Transcell Brand)
Horizontal Tension Force Accuracy	±0.5%
Vertical Compression Force Accuracy	±0.5%
Vertical Compression Force Control Time	0-Preset value, less than 0.2 seconds
Reducer	Ratio: 1:15, low noise during running
Adopting precision linear guide rail
Taiwan researches new high-end brake clutches; After the testing program is ready, the motor needs to maintain real-time operation to reach the predetermined speed state. By switching the clutch, the entire sliding distance should be kept at a constant speed
Transmission synchronous belt	Korea Samsung
Displacement Sensor	Resolution :0.001mm
Working Table	600x320mm (Stainless Steel)
Control Motor	Japan Servo Panasonic
Pressure System	Adopting Japanese SMC proportional valve control, computer setting, automatic pressurization
Control System+ Software	High speed acquisition system and dedicated testing software, built in EN 13287, SATRM 144, ASTM F2913, GB/T3903.6, ISO 20345, EN 13634
Protection	Pressure overload protection, air buffer travel limit protection. Emergency stop switch protection
Wedge Angle Gauge	7°
Compressed Air	Min 6 Bar (with Pneumatic spray gun for cleaning), customer prepare compressed air
Control	Built- In Industrial Computer with English Operation System
Power Supply	220V, 50Hz, Single Phase
Motor Power	0.55KW
Dimension	1680mmx700mmx100mm
Weight	300Kgs
Power Supply	AC 220V 50Hz 1500W