This machine test cold-endurance of rubber, plastic, shoe, synthetic leather…etc. It is helpful for analyzing both materials and products properties in the cold environment. The test chamber can be equipped with a variety of flexing/bending grips which are made by stainless steel. There are the following models to dynamically test the specimens in cold environment.
ASTM-D1052, ISO-5423, SATRA TM60, HB-T2411, HG/T 2411, ISO-4643,
SATRA TM92, EN 13634...ect
Working Chamber Material: SUS #304 Stainless Steel.
Reasonable air duct and circulation system make the temperature uniformity in good condition in the the working chamber.
Using high-performance motors and fan blades, with air convection and breeze device, the air in the inner cavity can be renewed and circulated.
The use of nano-material door seals and insulation materials makes the performance of the whole machine more superior.
Adopt original imported France Tecumseh compressor.
Box insulation material: 100mm high temperature resistant rigid polyurethane foam.
Cold and heat exchange device adopts ultra-high efficiency SWEP cold coal cold and heat exchange design.
Use big touch screen programmable controller.
Temperature control range | -20 ℃ to 150 ℃ |
Temperature maintaining stability | ≤±0.5℃ |
Temperature uniformity | ≤2℃ |
Temperature Resolution | 0.1℃ |
Temperature raise time | 30 minutes (+25℃→+85℃) |
Temperature cooling time | 45 minutes (+25℃→-30℃) |
Temperature raise speed | 3-5℃/min (average) |
Temperature cooling speed | 0.7-1℃/min (average) |
Dimension of test chamber | 400×500×400mm |
Note: The inner chamber can equip with various clamps (such as bally, ross) according to different standard |
Hot lines:
+86-531-67880131Address:No. 2 East Street Shengchan Road Jinan City Shandong China
Jinan Xinghua Instruments Co.,Ltd. All Rights Reserved