Your Location：Home > PRODUCTS>Plastic and Rubber Testing Equipments
This machine is composed of small precision single screw extruder, melt pump, filter, high precision melt temperature and pressure sensor, PLC program measurement and analysis system
ISO 12418-2:2012, EN 15348-2024
Parameters | Specifications |
Screw diameter | Φ20mm |
Screw L/D ratio | 28:1 |
Screw compression ratio | 3:1 |
Screw material | 38CrMoAla advanced nitride high-high strength alloy steel |
Screw speed | Rated from 0.1 to 100 rpm, servo speed regulation, pressure closed-loop control |
Temperature range | Zone 1/2/3/4, RT ~360℃ (Zone 5/6/7, 350℃) |
Heating method | 7-Channel SSR Temperature Control Zone and 3-Channel Temperature Measurement Zone |
Melt Pressure Transducer Range | P1:100bar P2:350bar |
Metallic Net Filter Size | 40um |
Main Motor Power | 1500W(servo motor) |
Transmission System | 20:1 ratio rectangular vortex line bevel gear reduction system |
Cooling equipment | KAKU ball-insert cooling fan×4 |
Maximum flow rate of the melt pump | 100cm3/min |
Melt pump motor power | 750W(servo motor) |
Heating area power | Zone 1-3: 2.7 kW; Zone 4: 0.9 kW; Zone 5: 1.2 kW; Zone 6-7: 1kW |
Power supply | AC 380v±10%/5-60Hz/8200W |
Overall dimensions | 1500×530×1520mm (L/W/H) |
Weight | 380Kg |
Hot lines：
+86-531-67880131Address：No. 2 East Street Shengchan Road Jinan City Shandong China
Jinan Xinghua Instruments Co.,Ltd. All Rights Reserved
