Your Location：Home > PRODUCTS>Plastic and Rubber Testing Equipments
Heat Seal Strength Tester is designed for hot tack and heat seal performance tests for plastic films, laminated films and other packaging films. Meanwhile, it can be used for peel, shear, tension and other test items for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.
ASTM F1921, ASTM F2029
1. Hot tack, hot sealing, peeling and tensile test items are integrated in one instrument.
2. Temperature control technology can quickly reach the set temperature, effectively avoiding temperature fluctuations
3. Four levels of force range and six levels of test speed to meet different testing requirements
4. The hot tack test adopts fully automatic injection, simplifies the operation, reduces errors, and ensures data consistency.
5. Automatic reset, fault prompt, overload protection, travel protection and other designs ensure safe operation
6. Anti scald safety design enhances operational safety
Sealing Temperature | Room temperature - 250°C |
Temperature Fluctuation | ±0.2°C |
Temperature Accuracy | ±0.5°C |
Dwell Time (Heat Seal) | 0.1 - 999.9 s |
Dwell Time (Hot Tack) | 0.1 - 999.9 s |
Sealing Pressure | 0.05 MPa - 0.7 MPa |
Sealing Area | 100 mm x 5 mm |
Sealing Jaw | Double sealing |
Gas Supply Pressure | 0.5 MPa - 0.7 MPa (outside of supply scope) |
Port Size | Φ4 mm PU Tubing |
Capacity Range | 30 N ( 50 N,100 N and 200N are optional) |
Accuracy | ±1% |
Resolution | 0.01 N |
Test Speed | 150mm/min, 200mm/min, 300mm/min, 500mm/min 1500mm/min, 2000mm/min adjustable |
Power Supply | 220VAC 50Hz / 120VAC 60Hz |
Dimension | 1120 mm (L) × 380 mm (W) × 330 mm (H) |
Weight | 45Kgs |
Hot lines：
+86-531-67880131Address：No. 2 East Street Shengchan Road Jinan City Shandong China
Jinan Xinghua Instruments Co.,Ltd. All Rights Reserved
