Your Location：Home > PRODUCTS>Plastic and Rubber Testing Equipments
The XHL-20 Film creep tester has a digital ruler system including a line laser pointer for manually measuring the creep.
The ruler is connected to the included computer via RS232 and the values are fed into a spreadsheet template which calculates the result.
Parameter of Oven:
l The outer shell is made of cold-rolled steel plate, with surface electrostatic spraying, and the inner shell is made of mirror stainless steel. The partition can be adjusted freely;
l Adopting PMMA II operating system, the LCD screen displays various parameters, and the temperature control has functions such as temperature control, timing, and over temperature alarm;
l Adopting imported motors and blades, reasonable air ducts and circulation systems, to minimize temperature uniformity changes in the working room;
l 6-stage speed regulation of fan;
l The box door has a large viewing angle glass observation window, which is convenient for users to observe;
l Using nano material door seals and insulation materials to enhance performance;
l Programmable programming, capable of setting 10 segments with 100 cycles;
Temp. Range | RT+5-85℃ |
Temp. Resolution Ratio | 0.1℃ |
Temp. Control Accuracy | ±0.5℃ |
Temp. Uniformity | ±2℃ |
Input Power | 750W |
Inner Chamber Size | 600X520X750mm |
Exterior Size | 890X746X905mm |
Timing Range | 0-9999min/h |
Load | 1300g |
Length Measurement Method | Laser |
Length Measurement Range | 0-300mm |
Length Measurement Resolution | 0.01mm |
Illumination of the inner chamber | Built in |
Dimension | 890X746X905mm |
Weight | 150Kgs |
Power Supply | 220V, 50Hz, 1ph |
Hot lines：
+86-531-67880131Address：No. 2 East Street Shengchan Road Jinan City Shandong China
Jinan Xinghua Instruments Co.,Ltd. All Rights Reserved
